SANDPIPER S20B1A1EANS000 2-Inch Aluminum Diaphragm Pump
S20B1A1EANS000SANDPIPER S20 complete air-operated double-diaphragm pump with 2-inch NPT ports, aluminum wetted components, Santoprene diaphragms and balls, and EPDM seats. Published S20 metallic capacity up to 200 gpm (758 L/min); maximum operating pressure 125 psi (8.6 bar).
- 标称端口尺寸
- 2 英寸
- 最大流量
- 758 L/min
- 潮湿住房
- 铝
- 隔膜材料
- Santoprene
了解泵。
2-Inch Aluminum AODD Pump
The SANDPIPER S20B1A1EANS000 is a complete S20 metallic air-operated double-diaphragm pump with 2-inch female NPT liquid connections. This standard configuration uses aluminum wetted components, Santoprene diaphragms and check balls, EPDM seats and a painted aluminum air section.
The S20 metallic series is intended for industrial transfer duties involving compatible liquids, moderate abrasives and suspended solids. Its ESADS+ air distribution system can be serviced externally, and the air valve does not require added lubrication.
模型配置
- 完整的模型: S20B1A1EANS000
- Series and design: S20 metallic, design level 1
- Wetted material: aluminum
- 隔膜和检查球: Santoprene
- Check-valve seats: EPDM
- Non-wetted material: painted aluminum
- Liquid connections: 2-inch internal NPT
- 配置:标准泵,不含可选泵或附件套件
性能参考
- 已公布的最大容量: 200 US gpm (758 L/min)
- 最大工作压力: 125 psi (8.6 bar)
- 最大悬浮固体尺寸: 1/4英寸(6 mm)
- Air inlet: 3/4-inch NPT
These are the manufacturer's S20 metallic performance limits. Published curves use an elastomer-equipped pump with flooded suction and water at ambient temperature. Air supply, backpressure, suction conditions and fluid properties determine the operating flow. Maximum flow and maximum pressure are not a simultaneous duty point.
应用选择
Consider this configuration for compatible water-based process fluids, industrial transfer and liquid-handling duties with small suspended solids. Evaluate aluminum, Santoprene and EPDM together against the actual process fluid. Do not assume suitability for oils, solvents, aggressive chemicals or hazardous locations from the pump's size or air-operated design.
维护和备件
The manufacturer lists air-end kit 476-421-000 for the aluminum center and wet-end kit 476-042-354 with Santoprene diaphragms, Santoprene balls and EPDM seats. Confirm the full model and serial number before ordering. These service kits are separate maintenance items.
Before maintenance, isolate the air supply, release pressure and safely drain the liquid. Use the manufacturer manual for disassembly, inspection and reassembly requirements.
请求泵选择或报价
Send the full model number, fluid and concentration, required flow and pressure, temperature, available compressed-air supply and connection details. For an existing installation, a readable nameplate photograph helps confirm the correct replacement configuration.
Manufacturer's S20 metallic series reference image. Exterior construction and materials may vary with the supplied configuration.
技术规格一览。
检查您的工作点的材料、连接和运行限制。
身份查验
| 品牌 | SANDPIPER |
|---|---|
| 型号/订单号 | S20B1A1EANS000 |
| 系列 | S20 金属 |
| 标称端口尺寸 | 2 英寸 |
| 最大流量 | 758 L/min |
| 潮湿住房 | 铝 |
| 隔膜材料 | Santoprene |
| 工作压力 | 8.6 bar |
| 连接标准 | NPT |
附加规格
| 最大工作压力(bar) | 8.6 |
|---|---|
| 最大固体(mm) | 6 |
| 进气口 | 3/4-inch NPT |
| 流体连接 | 2-inch female NPT suction and discharge |
隔膜配置的性能
| S20 metallic, elastomer-equipped reference | 758 L/min (200 US gpm) |
|---|
最大流量和最大压力是单独的额定值;它们并不描述一个同时工作点。
做出正确的选择。
与其分享流体、所需流量、排出压力和温度 WILLEE.