SANDPIPER S20B1A1EANS000 2-Inch Aluminum Diaphragm Pump
S20B1A1EANS000SANDPIPER S20 complete air-operated double-diaphragm pump with 2-inch NPT ports, aluminum wetted components, Santoprene diaphragms and balls, and EPDM seats. Published S20 metallic capacity up to 200 gpm (758 L/min); maximum operating pressure 125 psi (8.6 bar).
- Nominale havengrootte
- 2 inch
- Maximale stroomsnelheid
- 758 L/min
- Bevochtigde behuizing
- aluminium
- Het materiaal van het diafragma
- Santoprene
Ken de pomp.
2-Inch Aluminum AODD Pump
The SANDPIPER S20B1A1EANS000 is a complete S20 metallic air-operated double-diaphragm pump with 2-inch female NPT liquid connections. This standard configuration uses aluminum wetted components, Santoprene diaphragms and check balls, EPDM seats and a painted aluminum air section.
The S20 metallic series is intended for industrial transfer duties involving compatible liquids, moderate abrasives and suspended solids. Its ESADS+ air distribution system can be serviced externally, and the air valve does not require added lubrication.
Modelconfiguratie
- Compleet model: S20B1A1EANS000
- Series and design: S20 metallic, design level 1
- Wetted material: aluminum
- Membranen en controlekogels: Santoprene
- Check-valve seats: EPDM
- Non-wetted material: painted aluminum
- Liquid connections: 2-inch internal NPT
- Configuratie: standaardpomp, zonder optionele pomp of accessoire-kits
Referentie voor prestaties
- Gepubliceerde maximale capaciteit: 200 US gpm (758 L/min)
- Maximale bedrijfsdruk: 125 psi (8.6 bar)
- Maximum opgeschorte-vaste lichamengrootte: 1/4 inch (6 mm)
- Air inlet: 3/4-inch NPT
These are the manufacturer's S20 metallic performance limits. Published curves use an elastomer-equipped pump with flooded suction and water at ambient temperature. Air supply, backpressure, suction conditions and fluid properties determine the operating flow. Maximum flow and maximum pressure are not a simultaneous duty point.
Selectie van toepassingen
Consider this configuration for compatible water-based process fluids, industrial transfer and liquid-handling duties with small suspended solids. Evaluate aluminum, Santoprene and EPDM together against the actual process fluid. Do not assume suitability for oils, solvents, aggressive chemicals or hazardous locations from the pump's size or air-operated design.
Onderhoud en reserveonderdelen
The manufacturer lists air-end kit 476-421-000 for the aluminum center and wet-end kit 476-042-354 with Santoprene diaphragms, Santoprene balls and EPDM seats. Confirm the full model and serial number before ordering. These service kits are separate maintenance items.
Before maintenance, isolate the air supply, release pressure and safely drain the liquid. Use the manufacturer manual for disassembly, inspection and reassembly requirements.
Vraag een pompselectie of offerte aan
Send the full model number, fluid and concentration, required flow and pressure, temperature, available compressed-air supply and connection details. For an existing installation, a readable nameplate photograph helps confirm the correct replacement configuration.
Manufacturer's S20 metallic series reference image. Exterior construction and materials may vary with the supplied configuration.
Specificaties in één oogopslag.
Bekijk materialen, aansluitingen en bedrijfslimieten voor uw werkplek.
Identificatie
| Brand | SANDPIPER |
|---|---|
| Model / bestelnummer | S20B1A1EANS000 |
| Reeks | S20 Metallic |
| Nominale havengrootte | 2 inch |
| Maximale stroomsnelheid | 758 L/min |
| Bevochtigde behuizing | aluminium |
| Het materiaal van het diafragma | Santoprene |
| De werkdruk van | 8.6 bar |
| De standaard van de verbinding | NPT |
Aanvullende specificaties
| Maximum werkende druk (bar) | 8.6 |
|---|---|
| Maximum vaste stoffen (mm) | 6 |
| De inham van de lucht | 3/4-inch NPT |
| Vloeistofverbindingen | 2-inch female NPT suction and discharge |
Prestaties per membraanconfiguratie
| S20 metallic, elastomer-equipped reference | 758 L/min (200 US gpm) |
|---|
Maximaal debiet en maximale druk zijn afzonderlijke waarden; ze beschrijven niet één gelijktijdig bedrijfspunt.
Maak de juiste keuze.
Deel de vloeistof, de vereiste stroom, de druk en de temperatuur van de afvoer met WILLEE.