WILDEN 01-11391
A1P/AAPPP/TNU/TF/ATF/0160WILDEN 01-11391 is a 0.5-inch air-operated diaphragm pump in the Accu-Flo series. This configuration uses an aluminum wetted housing and PTFE diaphragms. The complete ordering configuration is A1P/AAPPP/TNU/TF/ATF/0160.
- Nominal port size
- 0.5 inch
- Maximum flow
- 11 US gpm
- Wetted housing
- aluminum
- Diaphragm material
- PTFE
Know the pump.
Construction & fluid path
The pump has clamped construction. Fluid connection specification: BSPT threaded. Check ball material: PTFE. Valve seat material: aluminum.
Performance & operating point
The published maximum flow is 11 US gpm. The listed maximum working pressure is 125 psig. Maximum flow and maximum pressure are separate ratings. The operating flow depends on discharge pressure, the available air supply, fluid properties and the selected configuration.
Specifications at a glance.
Review materials, connections and operating limits for your duty point.
Identification
| Brand | WILDEN |
|---|---|
| Model / order number | 01-11391 |
| Series | Accu-Flo |
| Full configuration | A1P/AAPPP/TNU/TF/ATF/0160 |
| Nominal port size | 0.5 inch |
| Maximum flow | 11 US gpm |
| Wetted housing | aluminum |
| Diaphragm material | PTFE |
| Drive type | Pneumatic |
| Working pressure | 125 psig |
| Construction | Clamped |
| Connection standard | BSPT |
| Connection type | Threaded |
| Check ball material | PTFE |
| Valve seat material | aluminum |
Performance
| Max Flow Rate (gpm) | 11 |
|---|---|
| Maximum Allowable Operating Pressure (psig) | 125 |
| Max Air Pressure (psig) | 125 |
| Max Diameter Solids (in.) | 0.06 |
| Max Suction Lift Dry (ft.) | 18.7 |
| Min Operating Temperature (°F) | 40 |
| Max Operating Temperature (°F) | 175 |
| Displacement Per Stroke (gal) | 0.024 |
| Self Priming | YES |
Materials & construction
| Technical Construction | CLAMPED |
|---|---|
| Wetted Path Material | ALUMINUM |
| Diaphragm Design | TRADITIONAL |
| Diaphragm Stroke | Reduced-Stroke |
| Valve Type | VALVE BALL |
| Valve Material | PTFE |
| O-ring / gasket material | PTFE |
| Outer Piston Materials | ALUMINUM |
| Air Side Material | POLYPROPYLENE |
| Hardware Material | DIAPHRAGM DEPENDENT |
| Muffler Material | Plastic |
| Construction Details | 0160 |
Connections
| Nominal fluid connection size (in.) | 0.5 |
|---|---|
| Inlet Size (in.) | 0.5 |
| Inlet Orientation | CENTER SWIVEL |
| Discharge Size (in.) | 0.5 |
| Discharge Orientation | CENTER SWIVEL |
| Air Inlet Connection | 1/4" FNPT |
| Muffler Connection Type | 1/2" FNPT |
Dimensions & weight
| Overall Length (in.) | 8.9 |
|---|---|
| Overall Width (in.) | 8.2 |
| Overall Height (in.) | 9.5 |
| Inlet Height (in.) | 1.1 |
| Inlet Horizontal Offset (in.) | 1.2 |
| Discharge Height (in.) | 7.8 |
| Discharge Horizontal Offset (in.) | 1.2 |
| Air Inlet Height (in.) | 4 |
| Muffler Connection Height (in.) | 4 |
Additional specifications
| Product family | ELECTRONIC CONTROLLED |
|---|---|
| Sub Series | Accu-Flo™ |
| Air-system service kit | NAK |
| Wetted-part service kit | 01-9804-55 |
Maximum flow and maximum pressure are separate ratings; they do not describe one simultaneous operating point.
Make the right selection.
Share the fluid, required flow, discharge pressure and temperature with Kevin.