Contact us for this product’s photograph.
WILDEN 20-10060
PX20/WWAAA/NES/PU/PEPWILDEN 20-10060 is a 1-inch air-operated diaphragm pump in the Pro-Flo X series. This configuration uses a cast iron wetted housing and neoprene diaphragms. The complete ordering configuration is PX20/WWAAA/NES/PU/PEP.
- Nominal port size
- 1 inch
- Maximum flow
- 1211.33 L/min
- Wetted housing
- cast iron
- Diaphragm material
- neoprene
Know the pump.
Construction & fluid path
The pump has clamped construction. Valve material: Polyurethane. Valve seat material: polypropylene.
Performance & operating point
The published maximum flow is 1211.33 L/min. Maximum flow and maximum pressure are separate ratings. The operating flow depends on discharge pressure, the available air supply, fluid properties and the selected configuration.
Specifications at a glance.
Review materials, connections and operating limits for your duty point.
Identification
| Brand | WILDEN |
|---|---|
| Model / order number | 20-10060 |
| Series | Pro-Flo X |
| Full configuration | PX20/WWAAA/NES/PU/PEP |
| Nominal port size | 1 inch |
| Maximum flow | 1211.33 L/min |
| Wetted housing | cast iron |
| Diaphragm material | neoprene |
| Drive type | Pneumatic |
| Construction | Clamped |
| Valve material | Polyurethane |
| Valve seat material | polypropylene |
Performance
| Family maximum flow (gpm) | 320 |
|---|
Materials & construction
| Wetted path material | Cast Iron |
|---|---|
| Construction code | WWAAA |
| Diaphragm code | NES |
| Valve / flap code | PU |
| Valve / flap material | Polyurethane |
| O-ring / gasket material | EPDM |
| Outer piston material | Cast iron |
Connections
| Nominal fluid connection size (in.) | 1 |
|---|
Additional specifications
| Product family | Pro Flo X |
|---|---|
| Seat / seal code | PEP |
| Air-system service kit | NAK |
| Wetted-part service kit | NME |
Maximum flow and maximum pressure are separate ratings; they do not describe one simultaneous operating point.
Make the right selection.
Share the fluid, required flow, discharge pressure and temperature with Kevin.