WILDEN 15-12175
XPX15/SZNNN/FWL/SF/FE/0771WILDEN 15-12175 is a 3-inch air-operated diaphragm pump in the Saniflo HS series. This configuration uses a stainless steel wetted housing and Santoprene® diaphragms. The complete ordering configuration is XPX15/SZNNN/FWL/SF/FE/0771.
- Nominal port size
- 3 inch
- Maximum flow
- 889.57 L/min
- Wetted housing
- stainless steel
- Diaphragm material
- Santoprene®
Know the pump.
Construction & fluid path
The pump has clamped construction. Valve material: stainless steel. Valve seat material: SANITARY EPDM.
Performance & operating point
The published maximum flow is 889.57 L/min. Maximum flow and maximum pressure are separate ratings. The operating flow depends on discharge pressure, the available air supply, fluid properties and the selected configuration.
Specifications at a glance.
Review materials, connections and operating limits for your duty point.
Identification
| Brand | WILDEN |
|---|---|
| Model / order number | 15-12175 |
| Series | Saniflo HS |
| Full configuration | XPX15/SZNNN/FWL/SF/FE/0771 |
| Nominal port size | 3 inch |
| Maximum flow | 889.57 L/min |
| Wetted housing | stainless steel |
| Diaphragm material | Santoprene® |
| Drive type | Pneumatic |
| Construction | Clamped |
| Valve material | stainless steel |
| Valve seat material | SANITARY EPDM |
Performance
| Family maximum flow (gpm) | 235 |
|---|
Materials & construction
| Wetted path material | Stainless Steel |
|---|---|
| Construction code | SZNNN |
| Diaphragm code | FWL |
| Valve / flap code | SF |
| Valve / flap material | Stainless steel |
| O-ring / gasket material | SANITARY EPDM |
| Outer piston material | No outer piston |
Connections
| Nominal fluid connection size (in.) | 3 |
|---|
Additional specifications
| Product family | Saniflo HS |
|---|---|
| Seat / seal code | FE |
| Special option code | 0771 |
| Air-system service kit | 04-9988-99 |
| Wetted-part service kit | NME |
Maximum flow and maximum pressure are separate ratings; they do not describe one simultaneous operating point.
Make the right selection.
Share the fluid, required flow, discharge pressure and temperature with Kevin.