WILDEN 08-15483
XH800/HZSAA/WWL/WF/HWFWILDEN 08-15483 is a 2-inch air-operated diaphragm pump in the HIGH PRESSURE series. This configuration uses an ALLOY C wetted housing and Santoprene® diaphragms. The complete ordering configuration is XH800/HZSAA/WWL/WF/HWF.
- Nominal port size
- 2 inch
- Maximum flow
- 95 US gpm
- Wetted housing
- ALLOY C
- Diaphragm material
- Santoprene®
Know the pump.
Construction & fluid path
The pump has bolted construction. Fluid connection specification: ANSI flanged. Check ball material: Santoprene®. Valve seat material: ALLOY C.
Performance & operating point
The published maximum flow is 95 US gpm. The listed maximum working pressure is 85 psig. Maximum flow and maximum pressure are separate ratings. The operating flow depends on discharge pressure, the available air supply, fluid properties and the selected configuration.
Specifications at a glance.
Review materials, connections and operating limits for your duty point.
Identification
| Brand | WILDEN |
|---|---|
| Model / order number | 08-15483 |
| Series | HIGH PRESSURE |
| Full configuration | XH800/HZSAA/WWL/WF/HWF |
| Nominal port size | 2 inch |
| Maximum flow | 95 US gpm |
| Wetted housing | ALLOY C |
| Diaphragm material | Santoprene® |
| Drive type | Pneumatic |
| Working pressure | 85 psig |
| Construction | Bolted |
| Connection standard | ANSI |
| Connection type | Flanged |
| Check ball material | Santoprene® |
| Valve seat material | ALLOY C |
Performance
| Max Flow Rate (gpm) | 95 |
|---|---|
| Maximum Allowable Operating Pressure (psig) | 85 |
| Max Air Pressure (psig) | 85 |
| Max Suction Lift Dry (ft.) | 12 |
| Min Operating Temperature (°F) | -40 |
| Max Operating Temperature (°F) | 225 |
| Max Viscosity (cP) | 125000 |
| Displacement Per Stroke (gal) | 0.44 |
| Self Priming | YES |
Materials & construction
| Technical Construction | BOLTED |
|---|---|
| Wetted Path Material | ALLOY C |
| Diaphragm Design | TPE IPD |
| Diaphragm Stroke | Full-Stroke |
| Valve Type | VALVE BALL |
| Valve Material | Santoprene® |
| O-ring / gasket material | SANTOPRENE |
| Outer Piston Materials | NO OUTER PISTON |
| Air Side Material | ALUMINUM |
| Hardware Material | STAINLESS STEEL |
| Muffler Material | Aluminum |
Connections
| Nominal fluid connection size (in.) | 2 |
|---|---|
| Inlet Size (in.) | 2 |
| Inlet Orientation | CENTER HORIZONTAL FRONT |
| Discharge Size (in.) | 2 |
| Discharge Orientation | CENTER HORIZONTAL BACK |
Additional specifications
| Product family | HIGH PRESSURE |
|---|---|
| Air-system service kit | 08-9992-99 |
| Wetted-part service kit | 08-9844-58-217 |
Maximum flow and maximum pressure are separate ratings; they do not describe one simultaneous operating point.
Make the right selection.
Share the fluid, required flow, discharge pressure and temperature with Kevin.