WILDEN 04-13507
GPS420/SSSSS/TWS/TF/STFWILDEN 04-13507 is a 1.5-inch air-operated diaphragm pump in the CSA Certified series. This configuration uses a stainless steel wetted housing and PTFE diaphragms. The complete ordering configuration is GPS420/SSSSS/TWS/TF/STF.
- Nominal port size
- 1.5 inch
- Maximum flow
- 128 US gpm
- Wetted housing
- stainless steel
- Diaphragm material
- PTFE
Know the pump.
Construction & fluid path
The pump has bolted construction. Fluid connection specification: NPT threaded. Check ball material: PTFE. Valve seat material: stainless steel.
Performance & operating point
The published maximum flow is 128 US gpm. The listed maximum working pressure is 125 psig. Maximum flow and maximum pressure are separate ratings. The operating flow depends on discharge pressure, the available air supply, fluid properties and the selected configuration.
Specifications at a glance.
Review materials, connections and operating limits for your duty point.
Identification
| Brand | WILDEN |
|---|---|
| Model / order number | 04-13507 |
| Series | CSA Certified |
| Full configuration | GPS420/SSSSS/TWS/TF/STF |
| Nominal port size | 1.5 inch |
| Maximum flow | 128 US gpm |
| Wetted housing | stainless steel |
| Diaphragm material | PTFE |
| Drive type | Pneumatic |
| Working pressure | 125 psig |
| Construction | Bolted |
| Connection standard | NPT |
| Connection type | Threaded |
| Check ball material | PTFE |
| Valve seat material | stainless steel |
Performance
| Max Flow Rate (gpm) | 128 |
|---|---|
| Maximum Allowable Operating Pressure (psig) | 125 |
| Max Air Pressure (psig) | 125 |
| Max Diameter Solids (in.) | 0.25 |
| Max Suction Lift Dry (ft.) | 11.4 |
| Min Operating Temperature (°F) | 40 |
| Max Operating Temperature (°F) | 220 |
| Max Viscosity (cP) | 125000 |
| Displacement Per Stroke (gal) | 0.24 |
| Self Priming | YES |
Materials & construction
| Technical Construction | BOLTED |
|---|---|
| Wetted Path Material | STAINLESS STEEL |
| Diaphragm Design | TRADITIONAL |
| Diaphragm Stroke | Full-Stroke |
| Valve Type | VALVE BALL |
| Valve Material | PTFE |
| O-ring / gasket material | PTFE |
| Outer Piston Materials | STAINLESS STEEL |
| Air Side Material | STAINLESS STEEL |
| Hardware Material | STAINLESS STEEL |
Connections
| Nominal fluid connection size (in.) | 1.5 |
|---|---|
| Inlet Size (in.) | 1.5 |
| Inlet Orientation | CENTER HORIZONTAL BACK |
| Discharge Size (in.) | 1.5 |
| Discharge Orientation | CENTER HORIZONTAL FRONT |
| Air Inlet Connection | FNPT |
| Muffler Connection Type | FNPT |
Dimensions & weight
| Overall Length (in.) | 13.1 |
|---|---|
| Overall Length With Muffler (in.) | 20.9 |
| Overall Width (in.) | 17.4 |
| Overall Height (in.) | 17.5 |
| Inlet Height (in.) | 2.5 |
| Inlet Horizontal Offset (in.) | 1.9 |
| Discharge Height (in.) | 15.4 |
| Discharge Horizontal Offset (in.) | 1.9 |
| Air Inlet Height (in.) | 10.3 |
| Muffler Connection Height (in.) | 9.8 |
Additional specifications
| Product family | CSA CERTIFIED |
|---|---|
| Sub Series | FIT SERIES |
| Air-system service kit | 04-9993-99-320 |
| Wetted-part service kit | 04-9824-55-201 |
Maximum flow and maximum pressure are separate ratings; they do not describe one simultaneous operating point.
Make the right selection.
Share the fluid, required flow, discharge pressure and temperature with Kevin.