WILDENPro-Flo®
WILDEN 02-13107
Ordering configuration
P2/KKPPP/GNU/TF/KTV/0400WILDEN 02-13107 is a 1-inch air-operated diaphragm pump in the Pro-Flo® series. This configuration uses a PVDF wetted housing and GORE diaphragms. The complete ordering configuration is P2/KKPPP/GNU/TF/KTV/0400.
- Nominal port size
- 1 inch
- Wetted housing
- PVDF
- Diaphragm material
- GORE
THE CONFIGURATION
Know the pump.
Construction & fluid path
The pump has clamped construction. Fluid connection specification: ANSI flanged. Check ball material: PTFE. Valve seat material: PVDF.
TECHNICAL DATA
Specifications at a glance.
Review materials, connections and operating limits for your duty point.
Identification
| Brand | WILDEN |
|---|---|
| Model / order number | 02-13107 |
| Series | Pro-Flo® |
| Full configuration | P2/KKPPP/GNU/TF/KTV/0400 |
| Nominal port size | 1 inch |
| Wetted housing | PVDF |
| Diaphragm material | GORE |
| Drive type | Pneumatic |
| Construction | Clamped |
| Connection standard | ANSI |
| Connection type | Flanged |
| Check ball material | PTFE |
| Valve seat material | PVDF |
Performance
| Max Diameter Solids (in.) | 0.13 |
|---|---|
| Min Operating Temperature (°F) | 40 |
| Max Operating Temperature (°F) | 175 |
| Self Priming | YES |
Materials & construction
| Technical Construction | CLAMPED |
|---|---|
| Wetted Path Material | PVDF |
| Diaphragm Design | UNSPECIFIED |
| Diaphragm Stroke | Reduced-Stroke |
| Valve Type | VALVE BALL |
| Valve Material | PTFE |
| O-ring / gasket material | PTFE-ENCAPSULATED FKM |
| Outer Piston Materials | PVDF |
| Air Side Material | POLYPROPYLENE |
| Hardware Material | STAINLESS STEEL |
| Muffler Material | Plastic |
| Construction Details | 0400 |
Connections
| Nominal fluid connection size (in.) | 1 |
|---|---|
| Inlet Size (in.) | 1 |
| Inlet Orientation | CENTER SWIVEL |
| Discharge Size (in.) | 1 |
| Discharge Orientation | CENTER SWIVEL |
| Air Inlet Connection | .25" FNPT |
| Muffler Connection Type | .5" FNPT |
Dimensions & weight
| Overall Length (in.) | 9.1 |
|---|---|
| Overall Length With Muffler (in.) | 11.5 |
| Overall Width (in.) | 11.5 |
| Overall Height (in.) | 13.1 |
| Inlet Height (in.) | 3 |
| Inlet Horizontal Offset (in.) | 4.2 |
| Discharge Height (in.) | 9.8 |
| Discharge Horizontal Offset (in.) | 4.2 |
| Air Inlet Height (in.) | 7.1 |
| Muffler Connection Height (in.) | 7.1 |
| Shipping Weight (lbs) | 21.7 |
Additional specifications
| Product family | PLASTIC INDUSTRIAL |
|---|
Maximum flow and maximum pressure are separate ratings; they do not describe one simultaneous operating point.
LET’S CHECK THE DETAILS
Contact Kevin Make the right selection.
Share the fluid, required flow, discharge pressure and temperature with Kevin.