WILDEN 01-10764
XPX1/AAAAA/TEU/TF/ATF/0014WILDEN 01-10764 is a 0.5-inch air-operated diaphragm pump in the Pro-Flo X series. This configuration uses an aluminum wetted housing and PTFE diaphragms. The complete ordering configuration is XPX1/AAAAA/TEU/TF/ATF/0014.
- Nominal port size
- 0.5 inch
- Maximum flow
- 62.84 L/min
- Wetted housing
- aluminum
- Diaphragm material
- PTFE
Know the pump.
Construction & fluid path
The pump has clamped construction. Valve material: PTFE. Valve seat material: aluminum.
Performance & operating point
The published maximum flow is 62.84 L/min. Maximum flow and maximum pressure are separate ratings. The operating flow depends on discharge pressure, the available air supply, fluid properties and the selected configuration.
Specifications at a glance.
Review materials, connections and operating limits for your duty point.
Identification
| Brand | WILDEN |
|---|---|
| Model / order number | 01-10764 |
| Series | Pro-Flo X |
| Full configuration | XPX1/AAAAA/TEU/TF/ATF/0014 |
| Nominal port size | 0.5 inch |
| Maximum flow | 62.84 L/min |
| Wetted housing | aluminum |
| Diaphragm material | PTFE |
| Drive type | Pneumatic |
| Construction | Clamped |
| Valve material | PTFE |
| Valve seat material | aluminum |
Performance
| Family maximum flow (gpm) | 16.6 |
|---|
Materials & construction
| Wetted path material | Aluminum |
|---|---|
| Construction code | AAAAA |
| Diaphragm code | TEU |
| Valve / flap code | TF |
| Valve / flap material | PTFE |
| O-ring / gasket material | PTFE |
| Outer piston material | Aluminum |
Connections
| Nominal fluid connection size (in.) | 0.5 |
|---|
Dimensions & weight
| Listed pump weight (kg) | 5.08032 |
|---|
Additional specifications
| Product family | Pro Flo X |
|---|---|
| Seat / seal code | ATF |
| Special option code | 0014 |
| Air-system service kit | 01-9988-99 |
| Wetted-part service kit | 01-9804-55-204 |
Maximum flow and maximum pressure are separate ratings; they do not describe one simultaneous operating point.
Make the right selection.
Share the fluid, required flow, discharge pressure and temperature with Kevin.