GRACOSaniForce 1040
GRACO 1040 FDA-FD1232
Model / order number
1040 FDA-FD1232GRACO 1040 FDA-FD1232 is a SaniForce 1040 air-operated double-diaphragm pump. Body material: Stainless steel. Fluid connection: 1.5 Tri-Clamp.
- Nominal port size
- 1.5 inch
- Maximum flow
- 151 L/min
- Wetted housing
- stainless steel
THE CONFIGURATION
Know the pump.
Product overview
GRACO 1040 FDA-FD1232 is a SaniForce 1040 air-operated double-diaphragm pump.
- Body material: Stainless steel.
- Fluid connection: 1.5 Tri-Clamp.
- Catalog maximum flow: 151 L/min.
- Maximum fluid pressure: 8 bar.
Selection and quotation
Quote model 1040 FDA-FD1232 when requesting a configuration check. Confirm material compatibility, fluid temperature, required flow and discharge pressure for the intended duty.
TECHNICAL DATA
Specifications at a glance.
Review materials, connections and operating limits for your duty point.
Identification
| Brand | GRACO |
|---|---|
| Model / order number | 1040 FDA-FD1232 |
| Series | SaniForce 1040 |
| Nominal port size | 1.5 inch |
| Maximum flow | 151 L/min |
| Wetted housing | stainless steel |
| Drive type | Air-operated |
| Working pressure | 8 bar |
| Connection standard | 1.5 Tri-Clamp |
| Check ball material | Neoprene Weighted |
Performance
| Elastomer configuration | Santoprene |
|---|---|
| Suction lift | 29 ft / 8.84 m |
| Maximum flow | 40 gpm / 151 lpm / 41 |
| Maximum viscosity | 10,000 cps |
| Maximum fluid pressure (MPa) | 0.8 |
| Maximum fluid pressure (psi) | 120 |
| Maximum flow (L/min) | 151 |
| Maximum pressure (bar) | 8 |
Materials & construction
| Body material | Stainless steel |
|---|---|
| Non-wetted material | Stainless steel |
| Wetted material | Stainless steel |
| Ball material | Neoprene Weighted |
| Manifold O-ring material | EPDM |
Connections
| Fluid inlet | 1.5 Tri-Clamp |
|---|---|
| Fluid outlet | 1.5 Tri-Clamp |
| Fluid port size | 1.5 in |
| Connection | 1.5 Tri-Clamp |
Additional specifications
| Model | 1040 FDA-FD1232 |
|---|---|
| Nominal size | 1.5 in |
| Maximum solid size | 1/8 in / 3.2 mm / 0.125 |
| Air exhaust size (in) | 3/4 |
| Air exhaust thread gender | Female |
| Air exhaust thread standard | NPT |
| Maximum cycle rate (cycles/min) | 256 |
| Drive | Air-operated |
| Pump type | Air-operated double-diaphragm pump |
| Maximum working pressure (bar) | 8 |
| Maximum solids (mm) | 3.2 |
Maximum flow and maximum pressure are separate ratings; they do not describe one simultaneous operating point.
LET’S CHECK THE DETAILS
Contact Kevin Make the right selection.
Share the fluid, required flow, discharge pressure and temperature with Kevin.
