AROEVO 300
ARO EP20-AFSTT-CSV-CDA
Model / order number
EP20-AFSTT-CSV-CDAARO EP20-AFSTT-CSV-CDA is a 2-inch electric diaphragm pump in the EVO 300 series. This configuration uses an aluminum wetted housing and PTFE diaphragms.
- Nominal port size
- 2 inch
- Maximum flow
- 140 gpm
- Wetted housing
- aluminum
- Diaphragm material
- PTFE
THE CONFIGURATION
Know the pump.
Performance & operating point
The published maximum flow is 140 gpm. The listed maximum working pressure is 180 psi. Maximum flow and maximum pressure are separate ratings. The operating flow depends on discharge pressure, the available drive power, fluid properties and the selected configuration.
TECHNICAL DATA
Specifications at a glance.
Review materials, connections and operating limits for your duty point.
Identification
| Brand | ARO |
|---|---|
| Model / order number | EP20-AFSTT-CSV-CDA |
| Series | EVO 300 |
| Nominal port size | 2 inch |
| Maximum flow | 140 gpm |
| Wetted housing | aluminum |
| Diaphragm material | PTFE |
| Drive type | Electric |
| Working pressure | 180 psi |
Performance
| Maximum flow rate | 140 gpm |
|---|---|
| Maximum fluid pressure | 180 psi |
| Maximum solids size | 1/4 in |
Materials & construction
| Wetted body material | Aluminum |
|---|
Additional specifications
| Pump category | EVO Series 2" Metallic Diaphragm Pump |
|---|---|
| Nominal port size | 2 in |
| Motor power | 7.5 hp |
| Motor frequency | 50/60 Hz |
| Motor phases | 3 |
Maximum flow and maximum pressure are separate ratings; they do not describe one simultaneous operating point.
LET’S CHECK THE DETAILS
Contact Kevin Make the right selection.
Share the fluid, required flow, discharge pressure and temperature with Kevin.