ARO PX30P-XXX-XXX-XXX — 3 inch non-metallic family
PX30P-XXX-XXX-XXXARO PX30P-XXX-XXX-XXX is a 3-inch air-operated double diaphragm pump family in the EXP Series. Wetted housing options include Polypropylene / PVDF. Diaphragm options include LongLife PTFE Santoprene ® Hytrel ® Buna-N PTFE w/ Santoprene ® backer.
- Nominal port size
- 3 inch
- Family maximum flow
- 285 gpm (1079 lpm)
- Housing options
- Polypropylene / PVDF
- Diaphragm options
- LongLife PTFE Santoprene ® Hytrel ® Buna-N PTFE w/ Santoprene ® backer
Know the pump.
Construction & fluid path
Listed fluid connection options: ANSI / DIN flange.
Performance & operating point
The published family maximum flow is 285 gpm (1079 lpm). The listed maximum working pressure is 120 psig (8.3 bar). Maximum flow and maximum pressure are separate ratings. The operating flow depends on discharge pressure, the available air supply, fluid properties and the selected configuration.
Configuration selection
This record describes a product family or model pattern. Select the complete ordering code and confirm its wetted materials, connections and operating limits before specifying a pump.
Specifications at a glance.
Review materials, connections and operating limits for your duty point.
Identification
| Brand | ARO |
|---|---|
| Model / order number | PX30P-XXX-XXX-XXX |
| Series | EXP Series |
| Nominal port size | 3 inch |
| Family maximum flow | 285 gpm (1079 lpm) |
| Housing options | Polypropylene / PVDF |
| Diaphragm options | LongLife PTFE Santoprene ® Hytrel ® Buna-N PTFE w/ Santoprene ® backer |
| Drive type | Pneumatic |
| Working pressure | 120 psig (8.3 bar) |
| Connection standard | ANSI / DIN flange |
Performance
| Ratio | 1:1 |
|---|---|
| Maximum flow rate (flooded inlet) | 285 gpm (1079 lpm) |
| Maximum outlet pressure | 120 psig (8.3 bar) |
| Maximum particle size | 3/8” dia. (9.5 mm) |
| Maximum dry suction lift ft (m) | 20.5 ft. (6.3m) |
| Sound Level | 70 PSI 60 Cycles/Min. 85.3 db(A) |
| Maximum air inlet pressure | 120 psig (8.3 bar) |
| Maximum material inlet pressure | 10 psig (0.69 bar) |
| Displacement per cycle @ 100 psig | 2.80 gal. (10.6 lit.) |
Materials & construction
| Wetted body options | Polypropylene / PVDF |
|---|
Connections
| Air Inlet | 3/4-14 NPT |
|---|---|
| Fluid Inlet / Outlet | 3” DIN (8-Bolt) Flange or 3” ANSI (4-Bolt) Flange |
Dimensions & weight
| Weight lbs (kg) | Polypropylene 170 lbs (77.11 kg) PVDF 242 lbs (109.59 kg) |
|---|
Additional specifications
| Nominal port size | 3 in |
|---|---|
| Pump architecture | Air-operated double diaphragm |
| Muffler Included | 67389 |
Maximum flow and maximum pressure are separate ratings; they do not describe one simultaneous operating point.
Make the right selection.
Share the fluid, required flow, discharge pressure and temperature with Kevin.