ARO PX10P-XXS-XXX — 1 inch non-metallic family
PX10P-XXS-XXXARO PX10P-XXS-XXX is a 1-inch air-operated double diaphragm pump family in the EXP Series. Wetted housing options include Polypropylene / Conductive Polypropylene / PVDF / Conductive PVDF. Diaphragm material options are listed in the technical specifications.
- Nominal port size
- 1 inch
- Family maximum flow
- 53.0 gpm (200.6 lpm)
- Housing options
- Polypropylene / Conductive Polypropylene / PVDF / Conductive PVDF
- Diaphragm options
- Multiple configuration options
Know the pump.
Construction & fluid path
Listed fluid connection options: ANSI / DIN flange.
Performance & operating point
The published family maximum flow is 53.0 gpm (200.6 lpm). The listed maximum working pressure is 120 psig (8.3 bar). Maximum flow and maximum pressure are separate ratings. The operating flow depends on discharge pressure, the available air supply, fluid properties and the selected configuration.
Configuration selection
This record describes a product family or model pattern. Select the complete ordering code and confirm its wetted materials, connections and operating limits before specifying a pump.
Specifications at a glance.
Review materials, connections and operating limits for your duty point.
Identification
| Brand | ARO |
|---|---|
| Model / order number | PX10P-XXS-XXX |
| Series | EXP Series |
| Nominal port size | 1 inch |
| Family maximum flow | 53.0 gpm (200.6 lpm) |
| Housing options | Polypropylene / Conductive Polypropylene / PVDF / Conductive PVDF |
| Diaphragm options | LongLife PTFE (not available with C-PVDF) Santoprene Hytrel Nitrile Medical Grade Santoprene PTFE w/ Santoprene backer Viton |
| Drive type | Pneumatic |
| Working pressure | 120 psig (8.3 bar) |
| Connection standard | ANSI / DIN flange |
Performance
| Ratio | 1:1 |
|---|---|
| Maximum flow rate (flooded inlet) | 53.0 gpm (200.6 lpm) |
| Displacement per cycle @ 100 psig | 0.226 gal. (0.86 lit.) |
| Maximum outlet pressure | 120 psig (8.3 bar) |
| Maximum particle size | 1/8” dia. (3.2 mm) |
| Maximum dry suction lift ft(m) | 19 (5.7) |
| Sound Level | 70 PSI 60 Cycles/Min 79.7 db(A) |
| Maximum air inlet pressure | 120 psig (8.3 bar) |
| Maximum material inlet pressure | 10 psig (0.69 bar) |
Materials & construction
| Wetted body options | Polypropylene / Conductive Polypropylene / PVDF / Conductive PVDF |
|---|
Connections
| Air Inlet (Female) | 1/4 - 18 N.P.T. |
|---|---|
| Fluid Inlet/Outlet | 1 - 11-1/2 N.P.T.F., Rp1(1-11 BSP) 1” A.N.S.I./DIN flange (side or center) |
Dimensions & weight
| Weight lbs (kg) | Polypropylene, Threaded Port 19.35 (8.78) Polypropylene, Center Ported 19.59 (8.89) Polypropylene, Side Ported 19.87 (9.01) PVDF, Threaded Port 25.83 (11.72) PVDF, Center Ported 26.72 (12.12) PVDF, Side Ported 27.15 (12.32) |
|---|
Additional specifications
| Nominal port size | 1 in |
|---|---|
| Pump architecture | Air-operated double diaphragm |
| Muffler Included | 93110 |
Maximum flow and maximum pressure are separate ratings; they do not describe one simultaneous operating point.
Make the right selection.
Share the fluid, required flow, discharge pressure and temperature with Kevin.