WILDEN 01-10820
A100P/PPPPP/WFS/WF/PWF/0150WILDEN 01-10820 is a 0.5-inch air-operated diaphragm pump in the Accu-Flo series. This configuration uses a polypropylene wetted housing and Santoprene® diaphragms. The complete ordering configuration is A100P/PPPPP/WFS/WF/PWF/0150.
- Nominal port size
- 0.5 inch
- Wetted housing
- polypropylene
- Diaphragm material
- Santoprene®
Know the pump.
Construction & fluid path
The pump has bolted construction. Fluid connection specification: NPT threaded. Check ball material: Santoprene®. Valve seat material: polypropylene.
Performance & operating point
The listed maximum working pressure is 125 psig. Maximum flow and maximum pressure are separate ratings. The operating flow depends on discharge pressure, the available air supply, fluid properties and the selected configuration.
Specifications at a glance.
Review materials, connections and operating limits for your duty point.
Identification
| Brand | WILDEN |
|---|---|
| Model / order number | 01-10820 |
| Series | Accu-Flo |
| Full configuration | A100P/PPPPP/WFS/WF/PWF/0150 |
| Nominal port size | 0.5 inch |
| Wetted housing | polypropylene |
| Diaphragm material | Santoprene® |
| Drive type | Pneumatic |
| Working pressure | 125 psig |
| Construction | Bolted |
| Connection standard | NPT |
| Connection type | Threaded |
| Check ball material | Santoprene® |
| Valve seat material | polypropylene |
Performance
| Maximum Allowable Operating Pressure (psig) | 125 |
|---|---|
| Max Air Pressure (psig) | 125 |
| Max Diameter Solids (in.) | 0.06 |
| Min Operating Temperature (°F) | 32 |
| Max Operating Temperature (°F) | 175 |
| Self Priming | YES |
Materials & construction
| Technical Construction | BOLTED |
|---|---|
| Wetted Path Material | POLYPROPYLENE |
| Diaphragm Design | TRADITIONAL |
| Diaphragm Stroke | Full-Stroke |
| Valve Type | VALVE BALL |
| Valve Material | Santoprene® |
| O-ring / gasket material | SANTOPRENE |
| Outer Piston Materials | POLYPROPYLENE |
| Air Side Material | POLYPROPYLENE |
| Hardware Material | STAINLESS STEEL |
| Muffler Material | Plastic |
| Construction Details | 0150 |
Connections
| Nominal fluid connection size (in.) | 0.5 |
|---|---|
| Inlet Size (in.) | 0.5 |
| Inlet Orientation | SIDE LEFT |
| Discharge Size (in.) | 0.5 |
| Discharge Orientation | SIDE LEFT |
| Air Inlet Connection | 1/4" FNPT |
| Muffler Connection Type | 1/2" FNPT |
Dimensions & weight
| Overall Length (in.) | 8.9 |
|---|---|
| Overall Width (in.) | 9.2 |
| Overall Height (in.) | 11 |
| Inlet Height (in.) | 2 |
| Inlet Horizontal Offset (in.) | 0 |
| Discharge Height (in.) | 10 |
| Discharge Horizontal Offset (in.) | 0 |
| Air Inlet Height (in.) | 5.3 |
| Muffler Connection Height (in.) | 5.4 |
| Shipping Weight (lbs) | 12 |
| Listed pump weight (kg) | 5.4432 |
Additional specifications
| Product family | ELECTRONIC CONTROLLED |
|---|---|
| Sub Series | Accu-Flo™ |
| Air-system service kit | NAK |
| Wetted-part service kit | 01-9815-58 |
Maximum flow and maximum pressure are separate ratings; they do not describe one simultaneous operating point.
Make the right selection.
Share the fluid, required flow, discharge pressure and temperature with Kevin.