GRACOHusky 2200
GRACO 653515
Model / order number
653515GRACO 653515 is a Husky 2200 air-operated double-diaphragm pump. Body material: Polypropylene (PP). Fluid connection: 2 Center Flange ANSI/DIN in / 51 Center Flange ANSI/DIN mm.
- Nominal port size
- 2 Center Flange ANSI/DIN in / 51 Center Flange ANSI/DIN mm
- Maximum flow
- 757.08 L/min
- Wetted housing
- Polypropylene (PP)
- Diaphragm material
- SP
THE CONFIGURATION
Know the pump.
Product overview
GRACO 653515 is a Husky 2200 air-operated double-diaphragm pump.
- Body material: Polypropylene (PP).
- Fluid connection: 2 Center Flange ANSI/DIN in / 51 Center Flange ANSI/DIN mm.
- Diaphragm: SP.
- Catalog maximum flow: 757.08 L/min.
- Maximum fluid pressure: 8.6 bar.
Selection and quotation
Quote model 653515 when requesting a configuration check. Confirm material compatibility, fluid temperature, required flow and discharge pressure for the intended duty.
TECHNICAL DATA
Specifications at a glance.
Review materials, connections and operating limits for your duty point.
Identification
| Brand | GRACO |
|---|---|
| Model / order number | 653515 |
| Series | Husky 2200 |
| Nominal port size | 2 Center Flange ANSI/DIN in / 51 Center Flange ANSI/DIN mm |
| Maximum flow | 757.08 L/min |
| Wetted housing | Polypropylene (PP) |
| Diaphragm material | SP |
| Drive type | Air-operated |
| Working pressure | 8.6 bar |
| Connection standard | 2 Center Flange ANSI/DIN in / 51 Center Flange ANSI/DIN mm |
| Check ball material | Santoprene |
| Valve seat material | SS |
Performance
| Maximum flow | 200 gpm / 757.08 lpm |
|---|---|
| Maximum operating temperature (°F) | 150 |
| Minimum operating temperature (°F) | 32 |
| Minimum storage temperature (°F) | 32 |
| Maximum fluid pressure (MPa) | 0.86 |
| Maximum fluid pressure (psi) | 125 |
| Ordering configuration | Husky™ 2200 PP Pump, Center Flange, PP Center Section, SS Seats, SP Balls & SP Diaphragm |
| Maximum flow (L/min) | 757.08 |
| Maximum pressure (bar) | 8.6 |
Materials & construction
| Wetted material | Polypropylene (PP) |
|---|---|
| Ball material | Santoprene |
| Body material | Polypropylene (PP) |
| Non-wetted material | Polypropylene (PP) |
| Manifold O-ring material | PTFE |
| Seat material | SS |
Connections
| Fluid inlet | 2 Center Flange ANSI/DIN in / 51 Center Flange ANSI/DIN mm |
|---|---|
| Fluid outlet | 2 Center Flange ANSI/DIN in / 51 Center Flange ANSI/DIN mm |
| Fluid port size | 2 Center Flange ANSI/DIN in / 51 Center Flange ANSI/DIN mm |
| Connection | 2 Center Flange ANSI/DIN in / 51 Center Flange ANSI/DIN mm |
Additional specifications
| Model | 653515 |
|---|---|
| Maximum solid size | 0.375 in / 10 mm |
| Air exhaust size (in) | 1 |
| Air exhaust thread gender | Female |
| Air exhaust thread standard | NPT |
| Maximum cycle rate (cycles/min) | 125 |
| Drive | Air-operated |
| Pump type | Air-operated double-diaphragm pump |
| Maximum working pressure (bar) | 8.6 |
| Maximum solids (mm) | 10 |
| Temperature range | 32 to 150 °F |
Maximum flow and maximum pressure are separate ratings; they do not describe one simultaneous operating point.
LET’S CHECK THE DETAILS
Contact Kevin Make the right selection.
Share the fluid, required flow, discharge pressure and temperature with Kevin.
