WILDENCSA Certified
WILDEN 02-13155
Ordering configuration
GPS220/AAAAA/TXU/TF/ATFWILDEN 02-13155 is a 1-inch air-operated diaphragm pump in the CSA Certified series. This configuration uses an aluminum wetted housing and PTFE diaphragms. The complete ordering configuration is GPS220/AAAAA/TXU/TF/ATF.
- Nominal port size
- 1 inch
- Wetted housing
- aluminum
- Diaphragm material
- PTFE
THE CONFIGURATION
Know the pump.
Construction & fluid path
The pump has bolted construction. Fluid connection specification: NPT threaded. Check ball material: PTFE. Valve seat material: aluminum.
TECHNICAL DATA
Specifications at a glance.
Review materials, connections and operating limits for your duty point.
Identification
| Brand | WILDEN |
|---|---|
| Model / order number | 02-13155 |
| Series | CSA Certified |
| Full configuration | GPS220/AAAAA/TXU/TF/ATF |
| Nominal port size | 1 inch |
| Wetted housing | aluminum |
| Diaphragm material | PTFE |
| Drive type | Pneumatic |
| Construction | Bolted |
| Connection standard | NPT |
| Connection type | Threaded |
| Check ball material | PTFE |
| Valve seat material | aluminum |
Performance
| Max Diameter Solids (in.) | 0.25 |
|---|---|
| Min Operating Temperature (°F) | 40 |
| Max Operating Temperature (°F) | 180 |
| Self Priming | YES |
Materials & construction
| Technical Construction | BOLTED |
|---|---|
| Wetted Path Material | ALUMINUM |
| Diaphragm Design | TRADITIONAL |
| Diaphragm Stroke | Reduced-Stroke |
| Valve Type | VALVE BALL |
| Valve Material | PTFE |
| O-ring / gasket material | PTFE |
| Outer Piston Materials | ALUMINUM |
| Air Side Material | ALUMINUM |
| Hardware Material | DIAPHRAGM DEPENDENT |
Connections
| Nominal fluid connection size (in.) | 1 |
|---|---|
| Inlet Size (in.) | 1 |
| Inlet Orientation | SIDE LEFT |
| Discharge Size (in.) | 1 |
| Discharge Orientation | SIDE LEFT |
| Air Inlet Connection | .5" FNPT |
| Muffler Connection Type | .75" FNPT |
Dimensions & weight
| Overall Length (in.) | 10.8 |
|---|---|
| Overall Length With Muffler (in.) | 16.4 |
| Overall Width (in.) | 14.2 |
| Overall Height (in.) | 11.3 |
| Inlet Height (in.) | 1.4 |
| Discharge Height (in.) | 10 |
| Air Inlet Height (in.) | 6.4 |
| Muffler Connection Height (in.) | 6.1 |
| Shipping Weight (lbs) | 33 |
Additional specifications
| Product family | CSA CERTIFIED |
|---|---|
| Sub Series | FIT SERIES |
| Air-system service kit | 02-9993-99-320 |
| Wetted-part service kit | 02-9814-55-215 |
Maximum flow and maximum pressure are separate ratings; they do not describe one simultaneous operating point.
LET’S CHECK THE DETAILS
Contact WILLEEMake the right selection.
Share the fluid, required flow, discharge pressure and temperature with WILLEE.
