WILDENSaniflo HS
WILDEN 08-16037
Ordering configuration
PS8/SZNNN/LEL/TF/TF/0774WILDEN 08-16037 is a 2-inch air-operated diaphragm pump in the Saniflo HS series. This configuration uses a stainless steel wetted housing and PTFE diaphragms. The complete ordering configuration is PS8/SZNNN/LEL/TF/TF/0774.
- Nominal port size
- 2 inch
- Wetted housing
- stainless steel
- Diaphragm material
- PTFE
THE CONFIGURATION
Know the pump.
Construction & fluid path
The pump has clamped construction. Fluid connection specification: TRI-CLAMP TRI-CLAMP. Check ball material: PTFE. Valve seat material: PTFE.
TECHNICAL DATA
Specifications at a glance.
Review materials, connections and operating limits for your duty point.
Identification
| Brand | WILDEN |
|---|---|
| Model / order number | 08-16037 |
| Series | Saniflo HS |
| Full configuration | PS8/SZNNN/LEL/TF/TF/0774 |
| Nominal port size | 2 inch |
| Wetted housing | stainless steel |
| Diaphragm material | PTFE |
| Drive type | Pneumatic |
| Construction | Clamped |
| Connection standard | TRI-CLAMP |
| Connection type | TRI-CLAMP |
| Check ball material | PTFE |
| Valve seat material | PTFE |
Performance
| Min Operating Temperature (°F) | 40 |
|---|---|
| Max Operating Temperature (°F) | 220 |
| Self Priming | YES |
Materials & construction
| Technical Construction | CLAMPED |
|---|---|
| Wetted Path Material | STAINLESS STEEL |
| Diaphragm Design | PTFE IPD |
| Diaphragm Stroke | Reduced-Stroke |
| Valve Type | VALVE BALL |
| Valve Material | PTFE |
| O-ring / gasket material | PTFE |
| Outer Piston Materials | NO OUTER PISTON |
| Air Side Material | ALUMINUM|NICKEL PLATED |
| Hardware Material | STAINLESS STEEL |
| Muffler Material | Aluminum |
| Construction Details | 0774 |
Connections
| Nominal fluid connection size (in.) | 2 |
|---|---|
| Inlet Size (in.) | 2 |
| Inlet Orientation | CENTER HORIZONTAL BACK |
| Discharge Size (in.) | 2 |
| Discharge Orientation | CENTER HORIZONTAL FRONT |
Dimensions & weight
| Shipping Weight (lbs) | 117 |
|---|
Additional specifications
| Product family | HYGENIC/FDA |
|---|---|
| Sub Series | HS SERIES |
| Air-system service kit | 04-9993-99 |
| Wetted-part service kit | NME |
Maximum flow and maximum pressure are separate ratings; they do not describe one simultaneous operating point.
LET’S CHECK THE DETAILS
Contact WILLEEMake the right selection.
Share the fluid, required flow, discharge pressure and temperature with WILLEE.
