WILDEN 04-12056
PX4/AAAAA/VTS/TF/VT/0014WILDEN 04-12056 is a 1.5-inch air-operated diaphragm pump in the Pro-Flo X series. This configuration uses an aluminum wetted housing and FKM diaphragms. The complete ordering configuration is PX4/AAAAA/VTS/TF/VT/0014.
- Nominal port size
- 1.5 inch
- Maximum flow
- 348.26 L/min
- Wetted housing
- aluminum
- Diaphragm material
- FKM
Know the pump.
Construction & fluid path
The pump has clamped construction. Valve material: PTFE. Valve seat material: FKM.
Performance & operating point
The published maximum flow is 348.26 L/min. Maximum flow and maximum pressure are separate ratings. The operating flow depends on discharge pressure, the available air supply, fluid properties and the selected configuration.
Specifications at a glance.
Review materials, connections and operating limits for your duty point.
Identification
| Brand | WILDEN |
|---|---|
| Model / order number | 04-12056 |
| Series | Pro-Flo X |
| Full configuration | PX4/AAAAA/VTS/TF/VT/0014 |
| Nominal port size | 1.5 inch |
| Maximum flow | 348.26 L/min |
| Wetted housing | aluminum |
| Diaphragm material | FKM |
| Drive type | Pneumatic |
| Construction | Clamped |
| Valve material | PTFE |
| Valve seat material | FKM |
Performance
| Family maximum flow (gpm) | 92 |
|---|
Materials & construction
| Wetted path material | Aluminum |
|---|---|
| Construction code | AAAAA |
| Diaphragm code | VTS |
| Valve / flap code | TF |
| Valve / flap material | PTFE |
| O-ring / gasket material | FKM |
| Outer piston material | Aluminum |
Connections
| Nominal fluid connection size (in.) | 1.5 |
|---|
Dimensions & weight
| Listed pump weight (kg) | 20.8656 |
|---|
Additional specifications
| Product family | Pro Flo X |
|---|---|
| Seat / seal code | VT |
| Special option code | 0014 |
| Air-system service kit | 04-9988-99 |
| Wetted-part service kit | NME |
Maximum flow and maximum pressure are separate ratings; they do not describe one simultaneous operating point.
Make the right selection.
Share the fluid, required flow, discharge pressure and temperature with Kevin.