AROPRO Series
ARO 6661BJ-3EB-C
Model / order number
6661BJ-3EB-CARO 6661BJ-3EB-C is a 1-inch air-operated diaphragm pump in the PRO Series. This configuration uses a cast iron wetted housing and Santoprene diaphragms.
- Nominal port size
- 1 inch
- Maximum flow
- 47 gpm
- Wetted housing
- cast iron
- Diaphragm material
- Santoprene
THE CONFIGURATION
Know the pump.
Performance & operating point
The published maximum flow is 47 gpm. The listed maximum working pressure is 120 psi. Maximum flow and maximum pressure are separate ratings. The operating flow depends on discharge pressure, the available air supply, fluid properties and the selected configuration.
TECHNICAL DATA
Specifications at a glance.
Review materials, connections and operating limits for your duty point.
Identification
| Brand | ARO |
|---|---|
| Model / order number | 6661BJ-3EB-C |
| Series | PRO Series |
| Nominal port size | 1 inch |
| Maximum flow | 47 gpm |
| Wetted housing | cast iron |
| Diaphragm material | Santoprene |
| Drive type | Pneumatic |
| Working pressure | 120 psi |
Performance
| Maximum flow rate | 47 gpm |
|---|---|
| Maximum fluid pressure | 120 psi |
| Maximum liquid temperature | 175 °F |
| Maximum solids size | 1/8 in |
| Suction lift | 15 ft |
Materials & construction
| Wetted body material | Cast Iron |
|---|
Additional specifications
| Pump category | 1” Non-Metallic Pro |
|---|---|
| Nominal port size | 1 in |
Maximum flow and maximum pressure are separate ratings; they do not describe one simultaneous operating point.
LET’S CHECK THE DETAILS
Contact Kevin Make the right selection.
Share the fluid, required flow, discharge pressure and temperature with Kevin.