WILDENTurbo-Flo™
WILDEN 15-10070
Ordering configuration
T15/AAAPB/BNU/BN/BNWILDEN 15-10070 is a 3-inch air-operated diaphragm pump in the Turbo-Flo™ series. This configuration uses an aluminum wetted housing and Buna-N diaphragms. The complete ordering configuration is T15/AAAPB/BNU/BN/BN.
- Nominal port size
- 3 inch
- Wetted housing
- aluminum
- Diaphragm material
- Buna-N
THE CONFIGURATION
Know the pump.
Construction & fluid path
The pump has clamped construction. Fluid connection specification: NPT threaded. Check ball material: Buna-N. Valve seat material: Buna-N.
TECHNICAL DATA
Specifications at a glance.
Review materials, connections and operating limits for your duty point.
Identification
| Brand | WILDEN |
|---|---|
| Model / order number | 15-10070 |
| Series | Turbo-Flo™ |
| Full configuration | T15/AAAPB/BNU/BN/BN |
| Nominal port size | 3 inch |
| Wetted housing | aluminum |
| Diaphragm material | Buna-N |
| Drive type | Pneumatic |
| Construction | Clamped |
| Connection standard | NPT |
| Connection type | Threaded |
| Check ball material | Buna-N |
| Valve seat material | Buna-N |
Performance
| Min Operating Temperature (°F) | 32 |
|---|---|
| Max Operating Temperature (°F) | 175 |
| Self Priming | YES |
Materials & construction
| Technical Construction | CLAMPED |
|---|---|
| Wetted Path Material | ALUMINUM |
| Diaphragm Design | ULTRA-FLEX |
| Diaphragm Stroke | Reduced-Stroke |
| Valve Type | VALVE BALL |
| Valve Material | Buna-N |
| O-ring / gasket material | Buna-N |
| Outer Piston Materials | ALUMINUM |
| Air Side Material | POLYPROPYLENE |
| Hardware Material | DIAPHRAGM DEPENDENT |
| Muffler Material | Aluminum |
Connections
| Nominal fluid connection size (in.) | 3 |
|---|---|
| Inlet Size (in.) | 3 |
| Inlet Orientation | CENTER HORIZONTAL BACK |
| Discharge Size (in.) | 3 |
| Discharge Orientation | CENTER HORIZONTAL FRONT |
| Air Inlet Connection | .75" FNPT |
| Muffler Connection Type | 1" FNPT |
Dimensions & weight
| Overall Length (in.) | 16.8 |
|---|---|
| Overall Width (in.) | 19.9 |
| Overall Height (in.) | 32.4 |
| Inlet Height (in.) | 2.2 |
| Inlet Horizontal Offset (in.) | 2.7 |
| Discharge Height (in.) | 30 |
| Discharge Horizontal Offset (in.) | 2.8 |
| Air Inlet Height (in.) | 16.5 |
| Muffler Connection Height (in.) | 12.3 |
| Shipping Weight (lbs) | 108 |
Additional specifications
| Product family | METAL INDUSTRIAL |
|---|
Maximum flow and maximum pressure are separate ratings; they do not describe one simultaneous operating point.
LET’S CHECK THE DETAILS
Contact WILLEEMake the right selection.
Share the fluid, required flow, discharge pressure and temperature with WILLEE.
