WILDEN 04-13521
P400/KKPPP/ZWS/WF/KWFWILDEN 04-13521 is a 1.5-inch air-operated diaphragm pump in the Pro-Flo® series. This configuration uses a PVDF wetted housing and Santoprene® diaphragms. The complete ordering configuration is P400/KKPPP/ZWS/WF/KWF.
- Nominal port size
- 1.5 inch
- Maximum flow
- 120 US gpm
- Wetted housing
- PVDF
- Diaphragm material
- Santoprene®
Know the pump.
Construction & fluid path
The pump has bolted construction. Fluid connection specification: ANSI flanged. Check ball material: Santoprene®. Valve seat material: PVDF.
Performance & operating point
The published maximum flow is 120 US gpm. The listed maximum working pressure is 125 psig. Maximum flow and maximum pressure are separate ratings. The operating flow depends on discharge pressure, the available air supply, fluid properties and the selected configuration.
Specifications at a glance.
Review materials, connections and operating limits for your duty point.
Identification
| Brand | WILDEN |
|---|---|
| Model / order number | 04-13521 |
| Series | Pro-Flo® |
| Full configuration | P400/KKPPP/ZWS/WF/KWF |
| Nominal port size | 1.5 inch |
| Maximum flow | 120 US gpm |
| Wetted housing | PVDF |
| Diaphragm material | Santoprene® |
| Drive type | Pneumatic |
| Working pressure | 125 psig |
| Construction | Bolted |
| Connection standard | ANSI |
| Connection type | Flanged |
| Check ball material | Santoprene® |
| Valve seat material | PVDF |
Performance
| Max Flow Rate (gpm) | 120 |
|---|---|
| Maximum Allowable Operating Pressure (psig) | 125 |
| Max Air Pressure (psig) | 125 |
| Max Diameter Solids (in.) | 0.25 |
| Max Suction Lift Dry (ft.) | 15.9 |
| Min Operating Temperature (°F) | 32 |
| Max Operating Temperature (°F) | 175 |
| Max Viscosity (cP) | 125000 |
| Displacement Per Stroke (gal) | 0.353 |
| Self Priming | YES |
Materials & construction
| Technical Construction | BOLTED |
|---|---|
| Wetted Path Material | PVDF |
| Diaphragm Design | EZ-INSTALL |
| Diaphragm Stroke | Full-Stroke |
| Valve Type | VALVE BALL |
| Valve Material | Santoprene® |
| O-ring / gasket material | SANTOPRENE |
| Outer Piston Materials | PVDF |
| Air Side Material | POLYPROPYLENE |
| Hardware Material | STAINLESS STEEL |
| Muffler Material | Plastic |
Connections
| Nominal fluid connection size (in.) | 1.5 |
|---|---|
| Inlet Size (in.) | 1.5 |
| Inlet Orientation | SIDE LEFT |
| Discharge Size (in.) | 1.5 |
| Discharge Orientation | SIDE LEFT |
Dimensions & weight
| Shipping Weight (lbs) | 70 |
|---|
Additional specifications
| Product family | PLASTIC INDUSTRIAL |
|---|
Maximum flow and maximum pressure are separate ratings; they do not describe one simultaneous operating point.
Make the right selection.
Share the fluid, required flow, discharge pressure and temperature with Kevin.