WILDEN 08-15957
XPS8/WSSSS/TWS/TF/MTFWILDEN 08-15957 is a 2-inch air-operated diaphragm pump in the Pro-Flo® SHIFT series. This configuration uses an IRON wetted housing and PTFE diaphragms. The complete ordering configuration is XPS8/WSSSS/TWS/TF/MTF.
- Nominal port size
- 2 inch
- Maximum flow
- 191 US gpm
- Wetted housing
- IRON
- Diaphragm material
- PTFE
Know the pump.
Construction & fluid path
The pump has clamped construction. Fluid connection specification: NPT threaded. Check ball material: PTFE. Valve seat material: MILD STEEL.
Performance & operating point
The published maximum flow is 191 US gpm. The listed maximum working pressure is 125 psig. Maximum flow and maximum pressure are separate ratings. The operating flow depends on discharge pressure, the available air supply, fluid properties and the selected configuration.
Specifications at a glance.
Review materials, connections and operating limits for your duty point.
Identification
| Brand | WILDEN |
|---|---|
| Model / order number | 08-15957 |
| Series | Pro-Flo® SHIFT |
| Full configuration | XPS8/WSSSS/TWS/TF/MTF |
| Nominal port size | 2 inch |
| Maximum flow | 191 US gpm |
| Wetted housing | IRON |
| Diaphragm material | PTFE |
| Drive type | Pneumatic |
| Working pressure | 125 psig |
| Construction | Clamped |
| Connection standard | NPT |
| Connection type | Threaded |
| Check ball material | PTFE |
| Valve seat material | MILD STEEL |
Performance
| Max Flow Rate (gpm) | 191 |
|---|---|
| Maximum Allowable Operating Pressure (psig) | 125 |
| Max Air Pressure (psig) | 125 |
| Max Suction Lift Dry (ft.) | 20.7 |
| Min Operating Temperature (°F) | 40 |
| Max Operating Temperature (°F) | 220 |
| Max Viscosity (cP) | 125000 |
| Displacement Per Stroke (gal) | 0.64 |
| Self Priming | YES |
Materials & construction
| Technical Construction | CLAMPED |
|---|---|
| Wetted Path Material | IRON |
| Diaphragm Design | TRADITIONAL |
| Diaphragm Stroke | Full-Stroke |
| Valve Type | VALVE BALL |
| Valve Material | PTFE |
| O-ring / gasket material | PTFE |
| Outer Piston Materials | STAINLESS STEEL |
| Air Side Material | STAINLESS STEEL |
| Hardware Material | DIAPHRAGM DEPENDENT |
| Muffler Material | Aluminum |
Connections
| Nominal fluid connection size (in.) | 2 |
|---|---|
| Inlet Size (in.) | 2 |
| Inlet Orientation | CENTER HORIZONTAL BACK |
| Discharge Size (in.) | 2 |
| Discharge Orientation | CENTER HORIZONTAL FRONT |
| Air Inlet Connection | 3/4" FNPT |
| Muffler Connection Type | 1-1/2" FNPT |
Dimensions & weight
| Overall Length (in.) | 13.8 |
|---|---|
| Overall Length With Muffler (in.) | 26.4 |
| Overall Width (in.) | 15.9 |
| Overall Height (in.) | 26.3 |
| Inlet Height (in.) | 1.8 |
| Inlet Horizontal Offset (in.) | 2.3 |
| Discharge Height (in.) | 24.8 |
| Discharge Horizontal Offset (in.) | 2.3 |
| Air Inlet Height (in.) | 14.1 |
| Muffler Connection Height (in.) | 13.6 |
| Shipping Weight (lbs) | 109 |
Additional specifications
| Product family | METAL INDUSTRIAL |
|---|
Maximum flow and maximum pressure are separate ratings; they do not describe one simultaneous operating point.
Make the right selection.
Share the fluid, required flow, discharge pressure and temperature with Kevin.