AROEVO 300
ARO EP10-PXXXX-XXX-XXX — 1 inch non-metallic family
Model pattern
EP10-PXXXX-XXX-XXXARO EP10-PXXXX-XXX-XXX is a 1-inch electric triple diaphragm pump family in the EVO 300 series. Wetted housing options include polypropylene.
- Nominal port size
- 1 inch
- Family maximum flow
- 54 gpm (204 lpm)
- Housing options
- polypropylene
THE CONFIGURATION
Know the pump.
Construction & fluid path
Listed fluid connection options: ANSI / DIN flange.
Performance & operating point
The published family maximum flow is 54 gpm (204 lpm). Maximum flow and maximum pressure are separate ratings. The operating flow depends on discharge pressure, the available drive power, fluid properties and the selected configuration.
Configuration selection
This record describes a product family or model pattern. Select the complete ordering code and confirm its wetted materials, connections and operating limits before specifying a pump.
TECHNICAL DATA
Specifications at a glance.
Review materials, connections and operating limits for your duty point.
Identification
| Brand | ARO |
|---|---|
| Model / order number | EP10-PXXXX-XXX-XXX |
| Series | EVO 300 |
| Nominal port size | 1 inch |
| Family maximum flow | 54 gpm (204 lpm) |
| Housing options | polypropylene |
| Drive type | Electric |
| Connection standard | ANSI / DIN flange |
Performance
| Maximum flow rate (flooded inlet) | 54 gpm (204 lpm) |
|---|---|
| Displacement per cycle @ 80 psig | 0.25 gal. (0.95 lit.) |
| Maximum material inlet pressure | 60 psig (4.14 bar) |
| Maximum Average Working Pressure | 120 PSIG (8.3 bar) |
| Maximum outlet working pressure (piping design limit) | 180 psig (12.4 bar) |
| Maximum particle size | 1/8" dia. (3.3mm) |
| Wet suction lift | 28 ft (8.5 m) |
| Dry suction lift | 14 ft (4.3 m) |
| Gear Ratio | 12.4:1 |
| Type and Classification (For hazardous configurations only. Please note: VFD should not be installed in a hazardous area.) | II (2) G [EX e] [Ex d] [Ex n] II (2) D [Ex tb] [Ex tc] II (2) G [EX e] [Ex d] [Ex n] II (2) D [Ex tb] [Ex tc] II (2) G [EX e] [Ex d] [Ex n] II (2) D [Ex tb] [Ex tc] |
Materials & construction
| Wetted body options | Polypropylene |
|---|---|
| Diaphragm / Ball Check Size | 1" (25.4 mm) equivalent |
Connections
| Fluid Inlet / Outlet Hybrid - internal thread | ANSI / DIN Hybrid flange |
|---|
Dimensions & weight
| Pump weight, without motor | EP10-EXXXX-XXX-XXA 225 lbs (102 kg) EP10-PXXXX-XXX-XXA 231 lbs (105 kg) |
|---|---|
| Weight | 380V-500V Model / Enclosure Size Type: A5 31.5 lbs (14.3 kg) 200V-240V Model / Enclosure Size Type: A5 31.5 lbs (14.3 kg) 525V-600V Model / Enclosure Size Type: A5 31.5 lbs (14.3 kg) |
Additional specifications
| Nominal port size | 1 in |
|---|---|
| Pump architecture | Electric triple diaphragm |
| Models | Polypropylene |
| Stroke | 1.34 in (34 mm) |
| Peak Efficiency | 62% |
| Maximum Pump Speed | 198 rpm |
| Mounting Dimension / Circumference Radius | 3 equally placed 0.63” (∅ 16 mm) hole on 24.88” (∅ 632 mm) B.C. / 26.48" (672.6 mm) |
| Dimensions *Pump with Gear Motor (not including hazardous encoder) | Height: 17.71" (449.9 mm) until outlet flange *40.55" (1030 mm); Hazardous Encoder Height: 5.09" (129.4 mm) Length: 28.48" (723.5 mm) Width: 31.04" (788.31 mm) |
| Rated Power / Phase / Voltage / Efficiency | 2.2Kw / 3 Phase / 400V / IE3 |
| Type and Classification | INERIS 10 ATEX 0025X (Gas) II 2 D EX tb IIIC T125° C Db Dust: II 2 D EX tb IIIC T125° C Db (Gas) CLASS 1, DIV 2, GROUPS C,D CLASS 1, ZONE 1, AEx db IIB T4 Gb (Dust) ZONE 21, AEx, tb IIIC T135°C Db |
| Encoder | 5V 1024 pp |
| Motor Amps @ 400V / 50Hz | 4.45 A |
| Dimensions for Standard & Hazardous Duty (Not including hazardous duty encoder) | Height: 21.71" (551.5 mm) Length: 8.22" (209 mm) Width: 8.22" (209 mm) |
| Dimensions of Hazardous Duty Encoder | 5.09" (129.4 mm) |
| Rated Power / Phase / Voltage | 3 Kw / 3 Phase / 380V-500V 3 Kw / 3 Phase / 200V-240V 3 Kw / 3 Phase / 525V-600V |
| Frequency | 50Hz / 60Hz 50Hz / 60Hz 50Hz / 60Hz |
| Maximum VFD Speed | 82Hz 82Hz 82Hz |
| VFD Input Amps (Cont. @ 441-500V) | 5.7 A @441-500V 11.3 A @200-240V 5.2 A @525-600V |
| VFD Input Amps (Inter. @ 441-500V) | 9.1 A @441-500V 18.1 A @200-240V 8.3 A @525-600V |
| Dimensions | Enclosure Size Type: A5 Height: 16.5" (420 mm); Width: 9.5" (242 mm); Depth: 9.10" (231.3 mm) Enclosure Size Type: A5 Height: 16.5" (420 mm); Width: 9.5" (242 mm); Depth: 9.10" (231.3 mm) Enclosure Size Type: A5 Height: 16.5" (420 mm); Width: 9.5" (242 mm); Depth: 9.10" (231.3 mm) |
Maximum flow and maximum pressure are separate ratings; they do not describe one simultaneous operating point.
LET’S CHECK THE DETAILS
Contact Kevin Make the right selection.
Share the fluid, required flow, discharge pressure and temperature with Kevin.