上海威理泵業有限公司隔膜泵及零部件 · 中國上海willeepump@gmail.com
WILLEEPUMP TECHNOLOGY

WILDEN 維修包:正確選擇氣動端或液體端維修包

比較 WILDEN 氣動端與液體端維修包,訂購前確認泵配置和維修包的具體內容。

WILDEN 02-9805-55

Identify which side of the pump needs parts

維修套件請求應該描述安裝的泵和計劃的維修。 WILDEN將空氣系統維修部件與溼側彈性體分開。 溼套件不是完整的空氣系統重建,空氣套件不會替換溼膜片和止回閥部件。

Record the symptom separately from the order. Poor delivery, air leakage and irregular cycling are observations, not proof that a particular kit will resolve the fault. For air-system symptoms, use our pilot-valve and main-air-valve guide to organize the information.

空氣套件和溼套件比較

Kit Service area Ordering information
空氣套件 空氣分配系統 ADS 系列、泵的尺寸和配置、泵材料、空氣閥材料和 ADS 選項。
Wet Kit Wet-side elastomer components Pump size and configuration, wetted construction and diaphragm specification.

The WILDEN repair-kits flyer, WIL-19100-F-04, 描述溼側部件,如隔膜、球、座、墊圈和O型圈。 實際內容取決於套件。 它還記錄了一個重要的空氣套件例外:T系列版本包括完整的空氣閥組件。

Use part numbers to narrow the request

目錄參考 Listed description Still to confirm
02-9805-55 Wet End Kit for 1-inch Original clamped plastic pumps with PTFE/Neoprene diaphragms. Full installed pump code, diaphragm configuration and required components.
04-9990-99 適用於1.5-到2-inch Pro-Flo X塑料螺栓泵的空氣修復套件。 Exact ADS, air-valve construction and kit applicability.

These are distinct catalogue examples, not a suggested pair for one pump. Preserve all suffixes in the part number and ask for the current kit contents to be checked against the equipment record.

Reconcile the kit with the repair list

  1. List the components required by the inspection and their quantities.
  2. Match each item to the selected kit’s documented contents.
  3. Identify separately ordered hardware, housings or other components.
  4. 檢查以前的修改是否改變了原始泵配置。
  5. 確認報價名稱,完整的套件編號和任何其他零件。

For an individual diaphragm, use the WILDEN diaphragm replacement guide對於單個密封件或墊圈,請使用 gasket and O-ring identification guide這樣可以避免將小型組件訂單與完整的套件訂單混淆。

Prepare the enquiry

聯絡 WILLEE with the nameplate, complete kit reference, required quantity and delivery destination. Availability and lead time are confirmed against the specific request. Our supply and selection support page explains the information used in that review.

將此內容納入您的下一次查詢

在批准空氣套件或溼式套件訂單之前,請確認 ADS 系列和套件的確切內容。

聯絡 WILLEE

請使用說明和規格來確定設備的確切配置。 本文介紹了選擇討論。

讓我們來談談您的應用

你的過程。
我們下次談話。

發送 WILLEE 您的流體、運行條件或完整的泵代碼。 從您所掌握的信息開始。

討論您的要求 WhatsApp WILLEE

需要泵或備件?

請將您的型號或零件編號發送給我們,以獲取庫存情況和報價。

查詢表格

打開聯繫頁面 ↗