WILDEN 15-2000-07 Air Valve Assembly: What to Check Before Ordering

WILDEN 15-2000-07 is a brass air valve assembly for the 3-inch Turbo-Flo (T) pump family. Before ordering, match the complete installed pump configuration and the applicable parts table, then confirm exactly what the supplier will deliver. A matching nominal pump size is not enough.

This guide focuses on the purchase specification for that assembly. It does not diagnose a fault or establish that a complete valve replacement is necessary.

1. Start with the exact part and pump identity

The official PSG Store listing identifies the component, brass construction and Turbo-Flo family. The 3-inch description refers to the listed pump family; it should not be read as an air-connection measurement.

For an installed pump, photograph the full nameplate and record every suffix and special configuration code. Add the serial number if readable. Keep a photograph of the existing air-side assembly with the enquiry, especially if the pump has previously been repaired or modified.

Use our WILDEN 15-2000-07 product reference to identify the requested item, but use the applicable manufacturer manual to establish the configuration match.

2. Check the model column, not only the T15 heading

The official T15 Clamped Metal EOM, document WIL-10252-E-01, contains configuration-specific parts tables. Selected examples in that revision show:

• T15/AAAPB, T15/AAAAB, T15/SSAPB and T15/SSSSB: air valve assembly 15-2000-07.
• T15/SSSSS: air valve assembly 15-2000-03.
• T15/AAAAD/0050: air valve assembly 15-2080-07.

These are examples from a named document revision, not a universal interchangeability list. They do not establish that one assembly can replace another. If a newer manual, the installed markings or an older purchase record gives a different number, resolve the discrepancy before releasing the order. Do not silently delete a suffix to obtain a catalogue match.

Save the manual title, revision and relevant page with the quotation. That creates a traceable reason for selecting the item and gives the receiving team something more useful than a photograph alone.

3. Agree on the delivered assembly contents

The T15 parts lists distinguish the air valve assembly from surrounding service parts. They list the screen, top and bottom end caps, snap rings and cap O-rings. Assembly footnotes and optional oil-bottle wording need to be read in the relevant table, rather than converted into a blanket packing promise.

The air valve gasket 15-2600-52 and mounting screws 08-6000-03 are separate line items in the manual. Ask explicitly whether these are included, reused under the maintenance procedure or quoted separately. An assembly name alone does not settle that question.

Make the quotation distinguish three groups:

• Included: components supplied under the assembly part number.
• Additional: separately priced service parts required for the planned work.
• Optional: items supplied only when expressly requested and confirmed.

Use the same grouping when comparing offers. A lower assembly price is difficult to evaluate if one offer includes extra service parts and another does not. For a broader kit purchase, see the Panduan Air Kit dan Wet Kit WILDEN.

4. Send a complete, compact RFQ

A useful request for quotation should contain:

1. The requested part number, written in full: 15-2000-07.
2. The complete pump model, serial number if available, and clear nameplate photograph.
3. The existing assembly markings and photographs, with any known modification history.
4. The applicable manual revision, parts-table page and model column.
5. Required quantity and a request for an itemized contents list.
6. Any separately needed gasket, fasteners or other service parts.
7. Required documentation, delivery destination and target delivery date.

Ask the supplier to identify the offered manufacturer and exact order reference, state any proposed substitution, and confirm availability and delivery timing for that quantity. Keep an unresolved compatibility question visible in the quotation rather than treating it as an accepted assumption.

5. Close the purchasing loop before installation

At receipt, compare the supplied order reference and contents against the agreed quotation. Record discrepancies before the package is released for maintenance. A photograph is useful supporting evidence, but it does not prove internal configuration or suitability.

This is a purchasing checklist, not a disassembly procedure. Installation and any inspection requiring disassembly should be performed by qualified personnel using the applicable manufacturer instructions and site isolation, depressurization and safety procedures.

Frequently asked questions

Is 15-2000-07 a complete air-side repair kit?

It is sold as an air valve assembly. Confirm its included components and list additional service parts separately; do not treat it as a complete pump air-side rebuild kit.

Does it fit every 3-inch WILDEN pump?

That is not established. The listing identifies the Turbo-Flo family, and the T15 manual shows different assembly numbers for different configurations. Check the full installed model and applicable revision.

Does ordering the assembly automatically include a gasket and screws?

Do not assume so. Confirm the delivered contents and any additional service parts in the quotation.

References and ordering support

Referensi teknis: PSG Store: 15-2000-07 identification dan WILDEN T15 Clamped Metal EOM, WIL-10252-E-01, Section 8. Check applicability to the installed pump before using a parts table.

Shanghai Willee Pump Co., Ltd. provides pump and spare-part identification and supply support. Send WILLEE the model and part details for a quotation. Compatibility, supply scope, documentation, stock and delivery are confirmed per enquiry. Brand references do not establish an authorized-distributor relationship.